Strainer

Petrosadid: Strainer

PETROSADID prides itself on providing Standard and Custom Engineered strainers to match our customer’s needs. The strainers supplied under this house offers an un-parallel solution towards protection of instruments such as valves, flow meters, pumps, etc., along with promoting cost effective solution through innovation.

For more information please contact our
Customer Support Center:
Customer Support Center
image
"T" Type Strainer

Most cost effective, T Type strainer uses perforated wire or mesh to trap unwanted solids from a process stream. T type strainer can be mounted vertically or horizontally in a piping system.T Type strainer are low cost solution to large nominal bore straining requirements.

T type strainer are commonly used in pipelines to prevent damage of Gauges, pumps, control valves, Flow meters and other process equipment.

• Fabricated T type strainer from 2” to 24” (larger sizes are available)

• Designed in accordance with ASME Section VIII Div. 1.

• Standard design pressures include 150psi, 300psi and ANSI 150 & 300. (Higher pressure available on request).

• T Type Strainer are available in CS,CSRL,SS304,SS316,Duplex,Super Duplex.

• Hinged covers are available for quick opening.

• Swing bolt opening available for quick opening.

image image
image
"Y" Type Strainer

Most cost effective, Y strainer uses perforated wire or mesh to trap unwanted solids from a process stream. Y strainer can be mounted vertically or horizontally in a piping system.Y strainer are low cost solution to large nominal bore straining requirements.

Y strainer are commonly used in pipelines to prevent damage of Gauges, pumps, control valves, Flow meters and other process equipment.

• Fabricated Y strainers from 2” to 24” (larger sizes are available)

• Designed in accordance with ASME Section VIII Div. 1.

• Standard design pressures include 150psi, 300psi and ANSI 150 & 300. (Higher pressure available on request).

• Vessels available in CS,CSRL,SS304,SS316,Duplex,Super Duplex.

• Hinged covers are available for quick opening.

• Swing bolt opening available for quick opening.

image image
image
Basket Strainer

Basket strainer consist of a removable Screen which can easily be removed from the top.Basket Strainer are used to trap suspended solids and particulate too large to be caught by most filter media. Basket strainer temporarily disrupt a system when cleaning is required.

If disruption to your system is unacceptable, duplex strainers (2 basket strainer arrangement) allow the system to run without any interruption by redirecting flow to an alternate basket when the other reaches capacity.

• Inline basket strainer housing.

• ASME designed inline basket housing.

• Basket flow inside out to trap particulate.

• Higher design pressures available

• Available with mesh liners and wedge wire

• Vessels available in carbon or stainless steel 304 or 316.

• Swing bolt closure allows for quick element change out.

• Davit used on larger vessels to facilitate basket change out.

• Customized design with legs that are easily installed using anchor bolts

image image
image
Duplex Strainer

Duplex strainer or Dual Basket strainer have cleanable basket which trap suspended solids.

Duplex strainer system usually consists of two separate strainer baskets housed. Duplex Strainer system also contains a valve handle placed between the two baskets to divert the flow of liquid to one strainer while the other is being cleaned. On some Duplex strainer, the valve will work automatically or manual valves can also be used.

Duplex strainer are installed in the pipeline systems where flow cannot be stopped.

• Inline duplex strainer basket housing.

• ASME designed inline basket housing.

• Basket flow inside out to trap particulate.

• 150 psig (10.3bar) @ 250°F(121.1°C) operating pressure standard.

• Higher designer pressures available

• Various options available like Wedge Wire Screens,Perforated Sheets,Wire Mesh,Puncplate Sheets etc.

• Vessels available in CS,CSRL,SS304,SS316,Duplex,Super Duplex,FRP

• Swing bolt closure allows for quick element change out.

image image
image
Conical Strainer

More cost effective, Conical Strainers strainer are temporary Strainers used mostly before start up of a Plant use perforated wire or mesh to trap suspended solids from a process stream.Conical strainers are usually installed horizontally in a piping system.

Conical strainer are commonly used in pipelines to prevent damage of Gauges, pumps, control valves, Flow meters and other process equipment.

• Fabricated Conical strainers from 2” to 24” (larger sizes are available)

• Designed in accordance with ASME Section VIII Div. 1.

• Standard design pressures include 150#.

• Conical strainer available in CS,CSRL,SS304,SS316,Duplex,Super Duplex.

• Conical strainer are available in both Basket type and Cone Type Temporary Strainers.

image image

How can we help you?

If you have questions, comments or feedback, please feel free to contact us. We are ready to help!